6.
According to the security method, select an encryption method.
☞
Depending of the selected method you have to enter addi-
tional information, such as WEP keys or passwords.
7.
To save the new SSID, tap on
OK
in the command bar.
The new SSID is displayed in the list within the
Config
tab.
8.
Select the SSID and tap on the
Connect
button.
☞
Within the
Status
tab, the connection status is displayed.
9.
To close the network window, tap on the softkey OK.
5.8
GNSS Antenna Power Management
In order to save battery power when working in the field, you can define a
switch-off time for the antenna. The antenna automatically switches off when
not being used for the defined length of time.
☞
You can define the switch-off time within
Start
Þ
Settings
Þ
Sys-
tem
Þ
GPS
Þ
Power Management
.
Alternatively, you can control the antenna power within Zeno Field or
Zeno Connect. When disconnecting from the antenna in the Leica
Zeno software, the antenna is switched off automatically to save bat-
tery power.
5.9
Customising the Start-Up Screen
009177_001
You can customise the start-up screen of the Zeno 20 device by using the app
“CustomLogoEditor.exe”. You can find this app in the folder
Windows/
CustomLogoEditor
.
Define a Switch-off
Time for the Antenna
Using the “CustomLo-
goEditor”
38
Software
