Leica Zeno 20 Series User Manual Download Page 17

Page: 17 / 48

Model

Zeno 20

3.75G

Android

Zeno 20

3.75G WEH

Zeno 20

CDMA

Android

Zeno 20

CDMA WEH

IC Number

3177A-

ZENO20G

3177A-

ZENO20G

3177A-

ZENO20C

3177A-

ZENO20C

2.2

System Concept

2.2.1

Software Concept

Software type

Description

Windows Embedded Hand-

held 6.5 Professional (WEH)

This software includes:

•

The English version of WEH.

•

The basic WEH functionality.

•

If ordered, Zeno Field or Zeno Connect

for Zeno 20.

Android 4.2.2

This software includes:

•

The language-specific version of Android.

•

The basic Android functionality.

•

If ordered, Zeno Mobile or Zeno Connect

for Zeno 20.

☞

This User Manual only describes the Windows Embedded Handheld

version of the Zeno 20. For more information about the other version

refer to the respective User Manual.

☞

The Zeno 20 is delivered with the operating system and software that

you ordered. The software is already licensed.

☞

The installation includes the latest released Zeno updates, the latest

released GNSS board firmware and the purchased Auth Code. Refer to

the according software documentation for more information.

2.2.2

Power Concept

Use the batteries, chargers and accessories recommended by Leica Geosystems

to ensure the correct functionality of the instrument.

Model

Power supply

Zeno 20

Internally by AZ206

battery, OR

Externally by AZ209

AC/DC adapter, OR

Externally by AZ208 car adapter.

If an external power supply is connected and the internal batter-

ies are inserted, then the external power is used. If the power

consumption of the Zeno 20 is less than the charging capacity,

the internal batteries are charged.

Software Options for

Zeno 20

General

Power Options

manufacturer: ETI CA Battery Inc.

manufacturer: Ktec

Description of the System

Summary of Contents for Zeno 20 Series

















































Search results

Summary of Contents for Zeno 20 Series

Reviews:

Related manuals for Zeno 20 Series

Brands by name

Popular brands

Leica Zeno 20 Series, User Manual

Search results

Summary of Contents for Zeno 20 Series

Reviews:

Related manuals for Zeno 20 Series

Brands by name

Popular brands