93
Settings
TPS400-5.0.1en
Settings
This menu enables extensive user-specific settings
in order to adapt the instrument to their own require-
ments.
Contrast
Setting the display contrast in 10% steps.
Trigger key
Configuration of the trigger key on side cover.
Off
Trigger key deactivated.
ALL
Trigger key with same function as
the [ALL]-key.
DIST
Trigger key with same function as
the [DIST]-key.
USER Key
Configure the USER Key with a function from the
FNC-menu.
V-Setting
The "0"- orientation of the vertical circle can be
either selected for the zenith, the horizontal plane or
in %.
•
Zenith:
Zenith=0°; Horizon=90°
•
Horizon: Zenith=90°;
Horizon=0°
•
V-(%): 45°=100%;
Horizon=0°
)
The % value increases rapidly. "--.--%"
appears on the display above 300%".
Tilt Correction
Off
Tilting compensation switched off.
1-axis
V-angles relate to the plumb line.
2-axis
V-angle refer to the plummet line and
the Hz-directions are corrected by the
standing axis tilt.
If the instrument is used on an unstable base (e.g.
shaking platform, ship, etc.) the compensator should
be switched off.
This avoids the compensator drifting out of it's
measuring range and interrupting the measuring
process by indicating an error.
)
The compensator setting remains active
even after the instrument is switched off.
