Leica S APO, User Manual

Page: 43 / 85

S Series User Manual Quick Start Guide 43
The integrated HD camera has many
possibilities for various applications
and conditions of use. Below are some basic
concepts to help you get the most performance
for your application.
In order to keep your camera up to date
and to benefit from newest functions you
should update the camera's firmware from time
to time. Detailed instructions about this topic
can be found in the download section of the
S9 i on our website. To check out your camera's
firmware version use the information box in
stand-alone mode (see section remote control)
or the "About" section in the software on the
computer.
Power S9 i
Power can be provided to the camera in the
following ways:
O
USB power connector on the microscope
stand
O
External USB power supply
O
USB connectors on the PC
1. Capture button
O
Used to capture an image in HDMI mode
2. Mode switch
O
Switch into different modes (USB mode,
Ethernet mode, HDMI mode)
3. Mode panel
O
The mode panel with the symbols for USB,
Ethernet and HDMI (from top to bottom)
indicates in which mode you are.
O
The LEDs will flash when you change from
one mode to another.
The S9 i With Integrated Camera
Note direct connection to an HD display
is possible in all modes.
3
2
1