54
Instruction manual V3.1 02/2001
12. Optional accessories
12.5 Combined carrier with magnifier and
illumination
This carrier includes a fluorescent lamp. The inclina-
tion angle of the magnifier can be adjusted as appro-
priate. It is possible to slew the entire carrier to the
side.
Protect the magnifier glass from exposure to
direct sunlight! Exposure to sunlight may
cause a burning glass effect. Risk of fire!
Mounting the magnifier
Introduce the pins
(1)
of the magnifier holder into
the holes of the carrier
(2)
and push the holder en-
tirely in.
To fix the magnifier, insert the set screws
(3)
into
the holes on the underside of the carrier and tighten
with a screwdriver.
To disassemble, proceed in reverse order.
Mounting the carrier
Turn the microtome off with the mains switch.
Remove the cover cap
(4)
.
Introduce the screw
(5)
into the hole of the carrier
(2)
.
Place the carrier
(2)
with the screw on the micro-
tome housing so that the screw is located in the
hole of the fitting device inside the housing.
Tighten the screw
(5)
with an Allen key size 6.
Close the hole with the cover cap
(6)
.
To disassemble, proceed in reverse order.
1
3
2
6
4
5
Fig. 54
The combined carrier with magnifier and il-
lumination can be mounted on all instruments
that contain the appropriate fitting device in-
side the housing.
If the instrument is not equipped with such a
fitting device, please contact you local Leica
service department.
Summary of Contents for RM2145
Page 2: ......
