Control unit with touch panel
46
PROVIDO Ref. 10732418 / Version 03
PROVIDO Ref. 10732418 / Version 03 47
9.3.6 Leica SpeedSpot settings
Leica SpeedSpot does not work during FL800 mode.
SpeedSpot Function
X
Select from the following:
Active, Not active
SpeedSpot Trigger
Leica SpeedSpot can automatically be switched on and off
depending on the following conditions:
• Focus
Movement of working distance motor
• Brakes
Brakes released
• XY (optional) Movement of XY motors
SpeedSpot Delay
For switching off Leica SpeedSpot, a timeout can be configurated
from 0 to 10 seconds.
Default timeout is 5 seconds.
0 seconds means that the function is switched off immediately.
9.3.7 Leica FL560 for M530 / Leica FL800 ULT
settings
The FL560 / FL800 settings are described in the corresponding user
manual.
• For the FL560, only lamp 1 shall be used.
• For optimum performance, we recommend a life time of
150 hours.
9.3.8 AutoFocus Settings
• AutoFocus is an optional function and can be ordered
additionally.
• AutoFocus does not work during FL800 mode.
The small grey field in the middle represents the AutoFocus
window.
Size
X
Adjust the size of the AutoFocus window
Possible settings:
10 % to 100 %
Default setting:
25 %
X Position / Y Position (optional)
X
Adjust the X and Y position of the AutoFocus window
Possible settings:
5 % to 100 %
Default setting:
50 % each, so the AutoFocus window is
exactly in the middle
AF Mode (optional)
X
Select from the following:
Active, Not active
Brake starts AF
When activated, releasing the brakes starts the AutoFocus function.
Parfocality
• When activated, the objective is automatically brought into
working distance at maximum magnification.
• When deactivated, the objective is automatically brought into
working distance at the current magnification settings.
AutoFocus functions can be operated via footswitch/handle.
AutoFocus settings are part of the function group "Extra",
see page 44.
