Leica MOJO RTK, User Manual

Page: 72 / 212

72 mojoRTK
Running the mojoRTK Console for the
First Time
4.4 Base Radio Wizard
Base Radio Wizard,
step-by-step 1. The Base Radio Wizard starts with
Base Radio Channel.
Use the main dial to
select the base radio channel. It is suggested to start with channel 0 unless inter-
ference is detected. Press when done.
)
The channel on the base station needs to be the same as the console. For informa-
tion about changing the channel, refer to "3.2.3 Changing the Radio Channel".
2. The screen will then display
Base Radio Status.
This is the base connection
status.
)
• If the country has been changed, this screen may not appear. If base status is
not good, try changing the channel on the base station. Press when done.
• The base station must be running and on the same channel for good signal
strength and base data reception.
3. If base status is not good, try changing the channel on the base station first and
then on the mojoRTK console by pressing the Escape button on the console
to go back to base channel setting menu. Ensure that the base station and
console are configured to the same region.