Leica MOJO RTK, User Manual

Page: 135 / 212

Service
mojoRTK
135
8.4 Restoring the Previous Version of Console Software
General informa-
tion If you perform an upgrade and there is an unforeseen problem that requires you to
return to the previous version of console software, you can restore the version of
software that was in the console before the last upgrade operation. Refer to "B.3
Formatting USB Flash Drives" for important information about using USB drives with
the mojoRTK products.
Restore the
previous software
version, step-by-
step 1. Insert a USB memory key with sufficient free space (at least 10MB).
2. From the navigation screen, press to enter main menu.
3. Turn the main dial to select Service , and press .
4. Use the main dial to select Software , and press .
5. Use the main dial to select Restore Previous , and press .
6. You will be asked to confirm that you want to restore the previous version of
console software.
7. Use the main dial to select Yes if you intend to proceed, or choose No or press
if you wish to cancel the operation.
)
After restoring the previous version of console software, the system will
request a restart.