manualshive.com logo in svg

Leica iCON grade iCP42, User Manual

Share
Download
Leica iCON grade iCP42 User Manual Download Page 134

134

iCON grade iCP42, Technical Data

9

Technical  Data

9.1

iCON grade iCP42 Technical Data

The iCP42 is designed to operate from standard vehicle power systems at 12 V / 24 V DC - 
check to ensure proper connection and polarity.

Instrument ports

Instrument dimensions

Weight

1.8 kg

Power

Name

Description

SIM card port

•

1x SIM card support

•

This port is located at the base of the instrument.

USB port

•

1x USB 2.0 port

•

This port is located at the base of the instrument.

HSPA Modem

•

HSPA modem for GPRS/GSM/EDGE/HSPA/UMTS communication.

•

This port is housed within the instrument.

WLAN

•

WiFi IEEE 802.1 a/g controller

•

This port is housed within the instrument.

Length [mm]

Height [mm]

Thickness [mm]

222

170

88

External supply voltage (cradle):

Nominal voltage 24 V DC, Range 20 V-28 V

Power consumption:

1.1 A @ 24 V cradle and iCP42

Summary of Contents for iCON grade iCP42













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands