Leica GS14 User Manual Download

Page: 45 / 58

GS14/GS16, Operation

4.5

LED Indicators on GS14/GS16

LED Indicators

Description

The GS14/GS16 GNSS instrument has

ight

mitting

iode indicators. They indicate

the basic instrument status.

Diagram

Description of the
LEDs

a) Bluetooth LED
b) Storage LED
c) Power LEDs
d) Position LED
e) RTK Base LED
f) RTK Rover LED

008657_001

a b c de f

IF the

THEN

Bluetooth
LED

green

Bluetooth is in data mode and ready for
connecting.

blue

Bluetooth has connected.

Storage LED

off

no microSD card is inserted or GS14/GS16 is
switched off.

green

microSD card is inserted but no raw data is being
logged.

flashing green

raw data is being logged.

flashing red

raw data is being logged but only 5% memory
left.

red

microSD card is full, no raw data is being logged
or no microSD card is inserted but GS14/GS16 is
configured to log raw data.

Position LED

off

no satellites are tracked or GS14/GS16 is
switched off.

flashing yellow

less than four satellites are tracked, a position is
not yet available.

yellow

a navigated position is available.

flashing green

a code-only position is available.

green

a fixed RTK position is available.
SmartLink is converging or has converged.

Power LED
(active

battery

)

off

battery is not connected, flat or GS14/GS16 is
switched off.

green

power is 20% - 100%.

red

power is 5% - 20%. The remaining time for which
enough power is available depends on the type of
survey, the temperature and the age of the
battery.

fast flashing red

power is low (<5%).

Summary of Contents for GS14



























































Search results

Summary of Contents for GS14

Reviews:

Related manuals for GS14

Brands by name

Popular brands

Leica GS14, User Manual

Search results

Summary of Contents for GS14

Reviews:

Related manuals for GS14

Brands by name

Popular brands