Leica GR10, Operational Manual

Page: 64 / 317

5: Getting started
Access the web interface for the first time and change the default user
This section explains using which user account the web interface can be accessed for the first time, how a new user
account is created and how the default user account is deleted.
Step Description
1
When accessing the web interface for the first time the default administrator user account
must be used.
2
On the Log in page use user name
Admin
and password
12345678
.
3
Then go to page
Receiver Setup Access Management
.
/
4
Use the
Create new user
button.
5
Type in a user name and password, confirm the password.
6
In the list box
Web interface user level
select
Adm nistrator
.
i
7
In list box
FTP server access
choose
Read / Write
.
8
Use the
Save changes
button to save all settings.
9
If the password meets the password requirements the new user account will be saved and
thus be shown in the list of configured users.
10
To avoid unauthorized access it is recommended to delete the default user.
11
For this, log out from the web interface and log in now using the new user account.
12
Go to
Receiver Setup / Access Management
and use the
Delete
button to delete the
default
Admin
user account.
13
Confirm the deletion by clicking on the
OK
button. After this, the default user
Admin
will have
been deleted.
Activate Leica support access step-by-step
This section explains how Leica Support can be allowed to access the web interface.
Step Description
1
Enter the web interface using a user account having Administrator rights.
2
Go to
Support / Properties
.
3
Activate check box
Enable Leica support
.
4
Save the settings using the
Save changes
button. Type topic text here.
63