Leica GR10, Operational Manual

Page: 254 / 317

11: External Devices
Configure a meteo device step-by-step
Step Description
1
Use the serial cable (article number XXX) which is connected to the meteo device and plug it into
the serial port the GR10.
2
In the web interface go to page
GNSS management / Data s s / Incoming data steams
.
tream
3
Click on button
Create new data stream
to open the wizard.
4
Select
Meteo
as device type and use the
Continue
button.
5
Select the specific meteo device and the data rate you would like to use and use the
Continue
button.
6
Tick the
Activate data stream
check box and use the
Save
button.
Make sure that the settings of serial port (P1) are identical to the settings of the serial port
of the meteo device.
Configure a tilt device step-by-step
Step Description
1
Use the serial cable (article number XXX) which is connected to the tilt device and plug it into the
serial port the GR10.
2
In the web interface go to page
GNSS management / Data s s / Incoming data steams
.
tream
3
Click on button
Create new data stream
to open the wizard.
4
Select
Tilt
as device type and use the
Continue
button.
5
Select the specific tilt device and the data rate you would like to use and use the
Continue
button.
6
Tick the
Activate data stream
check box and use the
Save
button.
Make sure that the settings of serial port (P1) are identical to the settings of the serial port
of the tilt device.
253