Leica GR10, Operational Manual

Page: 169 / 317

Printed Documentation
New User / Edit User
Setting Descriptions
The table below describes the settings that can be configured on the New User / Edit User page.
Field Description
User name
Enter a unique user name.
•
Maximum number of characters allowed is 30.
•
Only certain
ASCII characters
are allowed.
Password
Input user password.
•
Only certain
ASCII characters
are allowed.
•
The password length must be between 8 and 20 characters
•
The password should contain a mix of letters, numbers and symbols.
•
Note: If the logged in Administrator edits their user account, the
web interface access level cannot be changed.
Confirm password
Re-enter password to confirm.
Web interface user
level
Select the web interface user level.
•
None
This user has no access rights to the web interface in restricted mode. In
partially restricted mode the user can see the sensor status. This
functionality can be used for defining users with only FTP access.
•
Status Viewer
The Status viewer can login and view the receiver status when the web
interface access level is set to fully restricted.
•
GNSS manager
This user is allowed to view the receiver status and can access and edit
all settings in the GNSS management. The user can not access the
receiver setup pages or the support menu.
•
Administrator
The user can access all pages available in the receiver web interface
and change all available settings
Which web interface pages are visible to each user level is dependant on
whether the selected Access to Web interface is: Unrestricted, Partially restricted
168