Leica GR10, Operational Manual

Page: 121 / 317

Printed Documentation
GNSS management: Incoming data streams
GNSS management: Incoming data streams
Background Information
This page provides an overview of the configured incoming data streams.
Configure an incoming meteo or tilt data stream to the receiver by pressing
Create new data stream
.
•
One incoming data stream can be configured at a time. The device used to stream meteo or tilt data to the
receiver must be connected to the serial port.
Setting Descriptions
The table below describes the fields in the Incoming data streams tab.
Setting Description
Icon Data stream is active.
Data stream is inactive.
To activate or deactivate a data stream press the Activate
icon.
Stream Type
The configured outgoing session type (meteo or tilt).
Device
The configured meteo or tilt device connected to the serial
port.
Port
The configured port on the receiver receiving the meteo
and tilt data.
Data rate
The configured data rate.
Delete
Press delete to permanently delete the data stream.
Edit data stream
Press to edit the incoming data steam. The data stream
wizard will open.
Create new data stream (copy)
Press to create a new data stream product based on the
settings of an existing data stream.
Activate The data stream is inactive. Press to activate
the stream.
The data stream is active. Press to
deactivate the stream.
120