Leica GR10, Operational Manual

Page: 109 / 317

Printed Documentation
realtime message from different reference stations are sent on the same radio channel.
Nr of
reference
stations
Only visible when Time slicing is checked.
Select the number of reference stations in use from where realtime messages are sent on
the same radio channel.
Time slot
Select the time slot. This field is only visible when Time slicing is checked.
The time slot represents the actual time delay. The number of possible time slots is the
number of reference stations in use. The time delay equals 1 s divided by the total number
of reference stations. If two reference stations are used, the time delay is 0.50 s. Therefore,
the time slots are at 0.00 s and at 0.50 s. With three reference stations, the time delay is
0.33 s. The time slots are at 0.00, 0.33 and 0.66 s.
The following settings are dependant on the selected version and message type.
Data rate
Select the rate at which data will be sent.
Coordin te rate a
Select the rate at which coordinates will be sent.
Info rate
Select the rate at which the Reference Station information, such as point ID will
be sent.
Message xx rate
Enter the rate at which the selected messages will be sent out.
Message xx repeat
Enter the number of times the selected messages will be repeated.
Message 9nr. Satellites
The number of satellites to be included in message 9.
Press to go back to the previous wizard step. Press to continue to the next wizard step.
Press to cancel and return to GNSS management: Outgoing data stream .
108