Leica GPS900 Series Technical Reference Manual Download Page 190

Page: 190 / 287

Working with Determine Coord System

GPS900

190

28.2

Starting the Program

Access

Determine Coordinate System.

A) starting the program

CONT

(F1)

To accept the screen entries and continue.

CONF

(F2)

To configure the program.

CSYS

(F6)

To choose a coordinate system to edit. Only
available for Method=Normal.

Field

Description of Field

Name

•

A unique name for the coordinate system. The name may be up
to 16 characters in length and may include spaces.

•

Entering the name of a coordinate system will allow that existing
system to be updated.

WGS84 Pts Job

•

The job from which the points with WGS84 coordinates will be
taken.

Local Pts Job

•

The job from which the points with local coordinates will be taken.

Method

•

Method used to determine the coordinate system.

Summary of Contents for GPS900 Series
































































































































































































































































































Search results

Summary of Contents for GPS900 Series

Reviews:

Related manuals for GPS900 Series

Brands by name

Popular brands

Leica GPS900 Series, Technical Reference Manual

Search results

Summary of Contents for GPS900 Series

Reviews:

Related manuals for GPS900 Series

Brands by name

Popular brands