Leica GPS900 Series, Technical Reference Manual

Page: 149 / 287

Understanding MapView GPS900 149
25.6 MapView Components - The Point Symbols
Points When Show Points: Yes in MapView Configuration, points are displayed, in all modes,
according to their class.
)
Points of class NONE or points of class CTRL/MEAS with a height only component cannot be
displayed in MapView.
)
A list of the point types available, and their description, is available by pressing SYMBL (F3)
in MapView Configuration, Points page.
Symbol Description
3D control point is a point of class CTRL with full coordinate triplet.
2D control point is a position only point of class CTRL.
Adjusted point is a point of class ADJ.
Reference point is a point of class REF.
Average point is a point of class AVGE.
Measured point is a point of class MEAS.
Single Point Position uploaded from LGO.
Navigated point is a point of class NAV.
Estimated point is a point of class EST.
Calculated COGO point is a point of class MEAS or CTRL depending on the
COGO calculation method.