Leica GPS1200+, Technical Reference Manual, Page: 980 / 1442

Determine Coordinate System - Normal 980
40.5.3 Results for Classic 3D Transformation
DET C SYS
Transformation
Results,
Parameters page Results of the transformation between the WGS 1984 datum and the local datum are shown
for each of the transformation parameters. This screen consists of the
Parameters page and
the Rotn Origin page. The explanations for the softkeys given below are valid for the pages
as indicated.
Description of fields
CONT (F1)
To return to DET C SYS Step 4: Check Resid-
uals .
SCALE (F4) or PPM (F4)
Available on the Parameters page. To switch
between <Scale:> displaying the true scale
and displaying the ppm.
RMS (F5) or PARAM (F5)
To switch between the root mean square
values of the parameters and the actual
parameter values.
PAGE (F6)
To change to another page on this screen.
Field Option Description
<Shift dX:> Output Shift in X direction.
<Shift dY:> Output Shift in Y direction.
<Shift dZ:> Output Shift in Z direction.
<Rotation X:> Output Rotation around the X axis.