Leica GPS1200+, Technical Reference Manual, Page: 835 / 1442

COGO 835
38.6 COGO Calculation - Intersections Method
38.6.1 Intersection with Bearing - Bearing
Description The COGO intersection calculation bearing - bearing calculates the intersection point of two
lines. A line is defined by a point and a direction.
Elements that must be known are
• the coordinates of two points.
• the direction from these known points to the COGO point.
• offsets if required and configured.
The coordinates of the known points
• may be taken from the active job.
• may be manually occupied during the COGO calculation.
• may be entered.
Points with full coordinate triplets and position only points can be used. Position only is calcu-
lated, height can be typed in.