Leica GPS1200+, Technical Reference Manual, Page: 829 / 1442

COGO 829
<Offset:> Available for <Use Offsets: Yes> in COGO Configura-
tion , Parameters page. The offset of the COGO point from the line
of direction. A positive offset is to the right, a negative offset is to the
left.
Type in the azimuth, the distance and the offset, if required.
)
The values for the azimuth, the distance and the offset can be calcu-
lated from two existing points. 38.4
INV (F2) when <Azimuth:> , <HDist-XX:> or <Offset:> is highlighted.
To perform a COGO inverse calculation.
)
Upon pressing STORE (F1) in COGO Inverse , the result from
the COGO inverse calculation is copied to the field which was
highlighted when
INV (F2) was pressed.
)
For <Write Logfile: Yes> in COGO Configuration , Logfile
page the result of the COGO inverse calculation is written to
the logfile.
)
The values for the azimuth, the distance and the offset can be
selected from previous COGO inverse calculations. 38.12
LAST (F4) when <Azimuth:> , <HDist-XX:> or <Offset:> is high-
lighted. To recall previous results from COGO inverse calculations.
Upon pressing
CONT (F1) in COGO Last Inverse Calculations , the
selected result is copied to the field which was highlighted when
LAST (F4) was pressed.
Step Description Refer to
chapter