Leica GPS1200+, Technical Reference Manual

Page: 749 / 1442

MapView Interactive Display Feature 749
33.6 Plot Mode - MapView Screen Area
Description The plot mode of MapView is available as the Plot page in an application program and can
be used to view the results of the application program. Results are shown in black, all other
information, that is displayable, is shown in grey.
Access Refer to "33.2 Accessing MapView" paragraph "Example access for plot mode:".
OR
As a part of an application program, for example, COGO.
)
The COGO XX Results , Plot page is used as the example below. The functions described
are the same for all Plot pages.
COGO
XX Results,
Plot page The softkeys described below are specific to MapView in plot mode. Refer to "33.4.1
Softkeys" for descriptions of the standard softkeys.
SHIFT FACE (F1) and SHIFT PLAN (F1)
Available in REFPLANE XX Reference
Plane , Plot page. To change between the face
and the plane view of the plane.
SHIFT FIT R (F4)
To fit the results in the screen area.
SHIFT RFRSH (F5)
To refresh the screen.