Leica GPS1200+, Technical Reference Manual

Page: 743 / 1442

MapView Interactive Display Feature 743
33.5 Map Mode
33.5.1 MapView in Map Mode
Description The map mode of MapView is available as the Map page in data management and some
application programs. It can be used to display, select and edit points, lines and areas.
Access Refer to "33.2 Accessing MapView" paragraph "Example access for map mode:".
OR
From a choicelist in some screens, for example, in application programs, which access
data management.
OR
As a part of an application program, for example, COGO.
)
The MANAGE Data: Job Name , Map page is used as the example below. The functions
described are the same for all Map pages in map mode.
MANAGE
Data: Job Name,
Map page The softkeys described below are specific to MapView in map mode. Refer to "33.4.1
Softkeys" for descriptions of the standard softkeys.