manualshive.com logo in svg

Leica GPS1200+, Technical Reference Manual, Page: 587 / 1442

Share
Download
Leica GPS1200+ Technical Reference Manual Download Page 587

Configuration of Devices

587

Supported GPRS / 
Internet devices

Default GPRS / Internet devices fitting into a clip-on-housing

User defined GPRS / Internet devices

Other GPRS capable devices than those listed above can be used as long as they use AT 
commands. Their settings must be defined by creating a new GPRS / Internet device config-
uration. Refer to "23.3 Creating a New Device". These GPRS / Internet devices must be 
connected with a cable. Refer to "Appendix E Cables" for information on cables. Please 
contact the local selling unit or dealer for further information.

Advantages

• Unlimited range of the data link between reference and rover.
• Free of jamming from other users.
• Fees are charged for the amount of data being transferred.

• Registration

•  Siemens MC75

Summary of Contents for GPS1200+



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments