background image

Configuration of Devices

578

23.1.3

Modems

Typical uses

Example of use

Requirements for using 
modem

AT command language must be supported by the modem. Refer to "23.3 Creating a New 
Device".

• To transmit NMEA messages. • To download raw observations from a remote location.
• To transmit real-time data

Step

Description

1.

The reference is equipped with a modem.

2.

The rover is equipped with a digital cellular phone.

3.

Ensure that the modem is switched on.

4.

The rover digital cellular phone contacts the selected reference of which the phone 
number was pre-defined. Refer to "23.3 Creating a New Device".

5.

One rover can dial in to the reference modem at a time.

6.

As soon as the reference modem is contacted, it sends its data to the rover digital 
cellular phone that has called.

)

Several modem numbers can be pre-defined on the rover. Dialing a different 
number changes the reference station.

Summary of Contents for GPS1200+



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews: