Leica GPS1200+, Technical Reference Manual, Page: 568 / 1442

Config...\Interfaces... - General 568
22.15 ASCII Remote
Description The ASCII remote interface is used to
• send a command from a PC through the to a third party device, e.g. a barom-
eter.
• receive a message from a third party device through the at a PC.
For requesting ASCII Data a O utside W orld I nterface or Leica Binary 2 command is used.
Documentation for OWI and LB2 is available on request from the Leica Geosystems repre-
sentative.
The settings on this screen define the port and parameters for connecting a PC.
)
• The PC must be connected to a port assigned to the remote interface.
• The third party device must be connected to the port assigned to the ASCII remote inter-
face.
Access Select Main Menu: Config...\Interfaces... . Highlight ASCII Remote . EDIT (F3) .