Leica GPS1200+, Technical Reference Manual

Page: 332 / 1442

Manage...\Configuration Sets 332
14.3.5 Configuration Set for Real-Time Rover Operations
Description Configuring the receiver for real-time rover operations.
)
Real-time rover operations are possible with a or a GNSS. It provides
real-time to centimetre level.
In order to use a , a or a GNSS for real-time rover operations,
the RTCM v3 option must be activated. A , or GNSS provides
DGPS to 0.25 - 1 m level.
Configuration step-by-
step The following table provides recommendations for the most common settings. For all other
fields, the default settings can be used. Refer to the stated chapter for more information on
individual screens.
Step Description Refer to
chapter
1. Refer to "14.3 Creating a New Configuration Set". Follow the instruc-
tions in paragraph "Configuration step-by-step" up to step 7.
2. CONFIGURE Real-Time Mode 22.3.4
<R-Time Mode: Rover>
<R-Time Data: Leica>
)
ROVER (F2) configures additional rover station options such as using
a reference network.
22.3.4
)
DEVCE (F5) to configure devices. 23.2
3. CONT (F1)