Leica GPS1200+, Technical Reference Manual

Page: 290 / 1442

Manage...\Coordinate Systems 290
13.4 Coordinate Systems
13.4.1 Creating a New Coordinate System
)
Coordinate systems can be defined by manual creation or determined by calculation.
In this chapter, the manual creation of coordinate systems is explained. Refer to "39 Deter-
mine Coordinate System - General" for information on the determination by calculation.
)
Coordinate systems with a Classic 3D transformation can be defined by manual creation.
Access Refer to "13.3 Accessing Coordinate System Management" to access MANAGE Coordi-
nate Systems .
Create a coordinate
system step-by-step The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description Refer to
chapter
1. In MANAGE Coordinate Systems highlight a coordinate system. A
copy of this coordinate system is taken for further configurations.
2. NEW (F2) to access MANAGE New Coordinate System .
3. MANAGE New Coordinate System
<Name:>
A unique name for the new coordinate system. The name
may be up to 16 characters long and may include spaces.