Leica GPS1200+, Technical Reference Manual

Page: 140 / 1442

Manage...\Jobs 140
8 Manage...\Jobs
8.1 Overview
Description Jobs
• structure surveying projects.
• contain all points, lines, areas and codes that are recorded and stored.
• can be downloaded to LGO for post-processing or for data transfer to a further program.
• can be uploaded from LGO, for example, for real-time stake out operations.
• may be stored on the CompactFlash card or internal memory, if fitted.
Type of jobs • Data jobs. Explained in this chapter.
• DTM jobs. Refer to "44.4.4 Staking Out a DTM".
• Road jobs. Refer to the RoadRunner Manual.
Default job A job called Default is available on the receiver after formatting the memory device, inserting
a previously formatted CompactFlash card or deleting all jobs from MANAGE Jobs
(Device) .
Active job The active job is the one data is stored to. One job is always considered the active job. After
formatting the memory device, the job
Default is used until a user defined job is created and
selected.
When a job becomes active, then the sort and filter settings of this job are saved in the
SystemRAM. If the CompactFlash card is formatted then these last used sort and filter
settings are used for the job
Default .