Leica GPS1200+, Technical Reference Manual, Page: 1375 / 1442

NMEA Message Formats 1375
Appendix F NMEA Message Formats
F.1 Overview
Description N ational M arine E lectronics A ssociation is a standard for interfacing marine electronic
devices. This chapter describes all NMEA-0183 messages which can be output by the
receiver.
Access To set the output of NMEA messages on the receiver
Select Main Menu: Config...\Interfaces...\NMEA Out .
OR
Within the configuration set wizard. Refer to "14 Manage...\Configuration Sets".
Steer from a connected
device Use a query message. Refer to the interface control documents for for informa-
tion on this query message. The firmware CD contains these documents in electronic format.
)
A Talker ID appears at the beginning of the header of each NMEA message.
The Talker ID can be user defined or standard (based on the NMEA 3.0). This is normally
GP for GPS but can be changed in
CONFIGURE NMEA Output 1 or CONFIGURE NMEA
Output 2 .
)
CONFIGURE NMEA Output 2 is not available for RX1250 with SmartAntenna.