Leica GPS1200+, Technical Reference Manual, Page: 1255 / 1442

Survey - Hidden Points 1255
)
SUN (F3) when <Azimuth:> is highlighted. The azimuth from the
direction of the sun to <Point:> is computed.
47.4.1
)
AZMTH (F4) when <Azimuth:> is highlighted. To select or manually
occupy an auxiliary point and to compute the azimuth.
47.4.2
)
EAO (F2) available for <EAO Method: New for Each Point> or
<EAO Method: Permanent> in CONFIGURE Hidden Point Device
Offsets . To change or enter an E xternal A ngle O ffset.
23.1.7
4. HIDDEN PT Hidden Point Measurement
<Horiz Dist:>
The horizontal distance from <Point:> to the hidden
point.
Type in a distance. When a hidden point measurement device is
attached to the receiver to measure the distance, the value is auto-
matically transferred.
)
DIST (F2) available for Leica Disto
TM
pro
4
and Leica Disto
TM
pro
4
a
when a distance field is highlighted. To measure the distance without
pressing DIST on the Disto.
)
SLOPE (F5) when <Horiz Dist:> is highlighted. To measure a slope
distance and an elevation angle or percentage grade. The values are
used to compute the horizontal distance.
47.5
5. CALC (F1) calculates the hidden point and displays the results in
HIDDEN PT Hidden Point Result , Result page.
6. HIDDEN PT Hidden Point Result , Result page
Step Description Refer to
chapter