Leica GPS1200+, Technical Reference Manual, Page: 1227 / 1442

Survey - Auto Points 1227
<Monitor CQ:> Yes or No Activates monitoring of the coordinate quality. Auto
points are stored when the coordinate quality is within
the defined limit. For example, only phase fixed solu-
tions can be logged by defining a CQ limit.
<3D CQ Limit:> User input Available for <Monitor CQ: Yes> .
Limit for the coordinate quality above which an auto
point is no longer automatically stored. When the CQ
of the auto point falls again below the defined value
then the storing of auto points begins again.
<Beep When:> Logging Instrument beeps when storing an auto point.
Not Logging Available for <Monitor CQ: Yes> . Instrument gives a
single alarm beep each time an auto point is not
recorded because the limit for the coordinate quality
is exceeded. For
<Log By: Time> the beep is given
at the time when the point should have been
recorded. Unless
<Log By: Time> , the beep is given
at 1 Hz once the auto logging has stopped due to the
exceeded coordinate quality.
Never Instrument never beeps.
Field Option Description