Leica GPS1200+, Technical Reference Manual, Page: 1190 / 1442

Survey - General 1190
Description of fields
SHIFT INDIV (F5) and SHIFT RUN (F5)
To change between entering an individual
point ID different to the defined ID template and
the running point ID according to the ID
template. Refer to "19.1 ID Templates".
Field Option Description
<Point ID:> User input The identifier for manually occupied points. The
configured point ID template is used. The ID can be
changed in the following ways:
• To start a new sequence of point ID’s type over the
point ID.
• For an individual point ID independent of the ID
template SHIFT INDIV (F5) . SHIFT RUN (F5)
changes back to the next ID from the configured
ID template. Refer to "19.1 ID Templates".
<Antenna Ht:> User input The default antenna height as defined in the active
configuration set is suggested. Refer to "2 Antenna
Heights". Changing the antenna height here does not
update the default antenna height as defined in the
active configuration set. The changed antenna height
is used until the application program is exited.
<3D CQ:> Output The current 3D coordinate quality of the computed
position.