Leica GPS1200+, Technical Reference Manual, Page: 1176 / 1442

Stakeout 1176
44.4.5 Stakeout Difference Limit Exceeded
Description If configured a check is made on the horizontal and/or vertical coordinate distance from the
staked point to the point to be staked. Refer to "44.3 Configuring Stakeout" for information
on configuring the check and the limits.
Access The screen shown below is accessed automatically when the point is stored if either of the
configured difference limits are exceeded.
STAKEOUT
Difference Limit
Exceeded The availability of the fields depends on the configured <Stake Mode:> and <Use DTM:> .
For example for <Use DTM: DTM only> , position relevant fields are unavailable.
The limits that have been exceeded are shown in bold and indicated by a .
BACK (F1)
To return to STAKEOUT XX Stakeout without
storing the point. Staking out of the same point
continues.
STORE (F3)
To accept the coordinate differences, store the
point information and return to
STAKEOUT XX
Stakeout .
SKIP (F4)
To return to STAKEOUT XX Stakeout without
storing the point. According to filter and sort
settings the subsequent point in
<
Stakeout
Job:> is suggested for staking out.