Leica GPS1200+, Technical Reference Manual, Page: 1147 / 1442

Stakeout 1147
Next step
<DTM Job:> Choicelist Available for <Use DTM: DTM only> and <Use DTM:
DTM & Stake Job> in STAKEOUT Configuration ,
Heights page. To select a DTM to be staked and to
select the active DTM layer to be used. Heights are
then staked out relative to the selected DTM. Refer to
"44.4.4 Staking Out a DTM".
<Config Set:> Choicelist The active configuration set. All configuration sets
from
Main Menu: Manage...\Configuration Sets
can be selected. Configuration sets with <R-Time
Mode: Reference> cannot be used in the Stakeout
application program.
<Antenna:> Choicelist The antenna currently defined to be used in the
selected configuration set. All antennas from
Main
Menu: Manage...\Antennas can be selected.
IF the Stakeout
application program THEN
is to be accessed CONT (F1) accepts the changes and accesses Stakeout application
program. Refer to "44.4 Staking Out".
is to be configured CONF (F2) . Refer to "44.3 Configuring Stakeout".
Field Option Description