Leica Emspira 3, User Manual

Page: 42 / 73

Emspira 3 User Manual Startup Procedure 42
Switching on Emspira 3 (Continued)
PC mode
ON/OFF SS HDMI
SPEED
1. Set the ON / OFF switch to "ON" to switch
on Emspira 3.
The status light's LED switches from
blinking green to a continuous white,
a signal tone sounds and the live image is
displayed on the computer.
Emspira 3 is ready to use.
2. Start Leica Application Software X (LAS X).
3. Follow the instructions in the software for
adjusting and acquiring an image.
For additional information on
Leica Application Software X, please
refer to "LAS X Help".
You may be asked to specify the
current configuration when starting
LAS X for the first time.
For the image source section, select
the "Emspira 3" menu entry
to select
Emspira 3.
1