7.
The
InstallShield Wizard Completed
window appears.
8.
Click
Finish
to exit the wizard.
4.2
Batteries
4.2.1
Operating Principles
•
The battery must be charged before using it for the first time because it is
delivered with an energy content as low as possible
•
The permissible temperature range for charging is from 0 °C to
+40 °C/+32 °F to +104 °F. For optimal charging, we recommend charging
the batteries at a low ambient temperature of +10 °C to +20 °C/+50 °F to
+68 °F if possible
•
It is normal for the battery to become warm during charging. Using the
chargers recommended by Leica Geosystems, it is not possible to charge
the battery once the temperature is too high
•
For new batteries or batteries that have been stored for a long time
(> three months), it is effectual to make only one charge/discharge cycle
•
For Li-Ion batteries, a single discharging and charging cycle is sufficient.
We recommend carrying out the process when the battery capacity indic-
ated on the charger or on a Leica Geosystems product deviates signific-
antly from the actual battery capacity available
•
The batteries can be operated from −25°C to +55°C/−13°F to +131°F.
•
Low operating temperatures reduce the capacity that can be drawn; high
operating temperatures reduce the service life of the battery.
4.2.2
Changing the Battery
1
3
4
6
7
2
5a
5b
On
Off
1a
1a
1b
1b
0021791_001
1.
Turn off the field controller.
2.
Turn over the field controller.
3.
Push the horizontal lock to the right.
4.
Push the vertical lock downwards.
5.
Remove the battery.
6.
Insert a fully charged battery.
7.
Push the vertical lock upwards.
8.
Push the horizontal lock to the left.
First-time use/
charging batteries
Operation/discharging
Insert and remove the
battery step-by-step
Operation
25