4
Operation
4.1
Equipment Setup
4.1.1
Replacing the Display Foil on the CS
On delivery, the display of the CS is covered by a foil to protect the display
against scratches and dirt and to guarantee a trouble-free function of the
touchscreen in extreme and humid weather conditions. We strongly recom-
mend to use this display foil and to replace it, if necessary.
•
Remove the old display foil.
•
Ensure that the display is free of dust and grease.
•
Use the provided microfibre cloth to clean the display.
•
Look for a dust free and dry atmosphere surrounding while fixing the dis-
play foil. The recommended conditions are:
Temperature: approx. 21°C
Humidity: < 55%
The display foil lies between two thin carrier foils. The display foil has a silver-
coloured sticker to peel away the carrier foil from the actual display foil.
004510_001
1
2
3
4
1.
Touch the yellow-coloured sticker with two fingers and pull it slowly
upwards. The carrier foil is peeling away.
☞
Do not peel the carrier foil more than 2 cm - 3 cm away.
2.
Fix the adhesive underside of the display foil on the display edge.
Peel away the carrier foil slowly and smooth it out gently onto the
display.
3.
Remove the additional layer foil which has a red-coloured sticker.
4.
Potential air bubbles between display and display foil have to be
smoothed out using the included microfibre cloth.
☞
Do not use sharp objects!
5.
In case of remaining dust or grease under the display foil or the
need to replace the display foil, lift it again with some adhesive
tape.
4.1.2
Install USB Drivers
1.
Start the PC.
☞
Preparation
Fixing the display foil
step-by-step
Install Leica USB
drivers
Operation
23
