manualshive.com logo in svg

Leica Captivate, Technical Reference Manual, Page: 415 / 1060

Share
Download
Leica Captivate Technical Reference Manual Download Page 415

35.4

3D viewer Components

35.4.1

Panel Area

a

009302_002

b

c

d

 

a

Split panel on/off, available in

apps

b

North arrow

c

d

Toolbar

Icon Hardware keys

Description

Fn

+

Switches from full screen mode for 

3D viewer

 to

split panel to full screen mode for surveying

prompts area or advanced coding area.

Fn

+

twice

Switches directly from full screen mode for 

3D

viewer

 to full screen mode for surveying prompts

area or advanced coding area.

Fn

+

Switches from full screen mode for surveying

prompts area or advanced coding area to split

panel to full screen mode for 

3D viewer

.

Fn

+

twice

Switches directly from full screen mode for survey-

ing prompts area or advanced coding area to split

panel to full screen mode for 

3D viewer

.

35.4.2

Keys, Softkeys and Toolbar

Standard functionality is provided by a toolbar and hardware keys.
Tools are available in a toolbar. The toolbar is always on the right side of the

panel. Some of the functions performed by the tools can also be replicated

using a hardware key. The softkey/key equivalent of each tool, if one exists,

are indicated in the following table.

Tools are available in groups. The groups available depend on the active app.
Click an icon to display the group of related tools.

Standard panel

Description

Tools

3D viewer

415

Summary of Contents for Captivate





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments