Leica Builder M power, User Manual

Page: 97 / 233

Station Setup, for Builder R, RM,
M power and RM power Builder 97
9.4.2 Height Transfer
Description The Setup method Height Transfer is used to determine the height of the position
of the instrument from measurements to up to five target points with known height.
Diagram
Example of a result
screen
P0 Station
P1 First point with known height
P2 Second point with known height
P3 Third point with known height
P1
P0
P3
P2
REDO To delete or re-measure an used
point.
OK To accept computed/measured
values.