Leica Builder M power, User Manual

Page: 96 / 233

96 Builder
Station Setup, for Builder R, RM,
M power and RM power
9.4 Setup Option 3: Establish Height
9.4.1 General
Description The Setup Option Establish Height is used to enter the station height, instrument
height and reflector height. All further measuring points and points to be staked are
in relation to the entered values.
Enter station
height, instrument
height and
reflector height
step-by-step
Step Description
)
Make sure that PROG Mode is active.
1. Press SETUP .
2.
Press to highlight Setup option Height .
3. If a value for station height is shown, the value is related to the chosen
setup method of
Control Line or Coordinates . This value may be changed
or in case of <-----.----> , a height can be entered.
4. Enter station height, instrument height and reflector height.
5. Accept with OK .