Leica Builder M power, User Manual

Page: 141 / 233

Data Management Mode, for
Builder RM, M power and RM power Builder 141
11.4 Fixpoints
Description Fixpoints contain at least a point identifier, easting and northing or height.
Fixpoints can be
•
created, viewed and deleted in the field
• downloaded for data transfer to a further program
• uploaded, for example for stakeout operations
Create a new
fixpoint step-by-
step
Step Description
)
Make sure that DATA Mode is active.
1.
Press to set <Type:> Fixpoint .
2. Press POINTS to access point management.
3. Press NEW PT to create a new fixpoint.
4. Enter point identifier, easting, northing and/or height.
5. Accept with OK .
)
The new point is created.