☞
National laws and local regulations could impose more stringent
instructions for the safe use of lasers than IEC 60825-1 (2014-05)
and IEC TR 60825-14 (2004-02).
1.6.2
Scanning Laser
The laser incorporated in the product produces an invisible beam which
emerges from the rotating mirror.
The laser product described in this section is classified as laser class 1 in
accordance with:
•
IEC 60825-1 (2014-05): “Safety of laser products”
These products are safe under reasonably foreseeable conditions of operation
and are not harmful to the eyes provided that the products are used and
maintained in accordance with this User Manual.
Description
Value
Wavelength
830 nm
Maximum pulse energy
9 nJ
Pulse duration
3 ns
Pulse repetition frequency (PRF)
1.64 MHz
Beam divergence (FWHM, full angle)
0.5 mrad
Mirror rotation
100 Hz
Base rotation
2.5 Hz
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, Including
interference that may cause undesired operations.
Complies with 21 CFR
1040.10 and 1040.11
except for conformance
with IEC 60825-1 Ed.3,
as described in Laser
Notice No. 56, dated May 8, 2019
Model: BLK2GO
Art.No.: 875578
Leica Geosystems AG
CH-9435 Heerbrugg
Made in Switzerland
FCC-ID: RFD-BLK2GO
IC:
3177A-BLK2GO
acc.
T
o
ICC 60825-1:2014
Complies with 21 CFR
1040.10 and 1040.1
1
except for deviations
pursuant to Laser Notice
No. 50, dated June 24, 2007
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1)
This device may not
cause harmful interference, and (2) this
device must accept any interference
received, Including interference that may
cause undesired operations.
Model: BLK2GO
Art.No.: 875578
Leica Geosystems
AG
CH-9435 Heerbrugg
Made in Switzerland
FCC-ID: RFD-BLK2GO
IC: 3177A-BLK2GO
0°
0°
360°
90°
b
a
270°
19450_001
a
Location of laser beam
b
Sphere of scanning laser beam
1.7
Electromagnetic Compatibility (EMC)
The term Electromagnetic Compatibility is taken to mean the capability of the
product to function smoothly in an environment where electromagnetic radi-
General
Labelling
Description
Safety Directions
11
