Leica BLK2FLY User Manual Download

Page: 40 / 120

7.4

Status Bar

23612_001_en

e f

FLIGHT STATUS

STORAGE REMAINING

CONNECTIVITY

status

BLK2FLY BATTERY

status

Warning

Tap to reduce/maximise the

status bar

Reduced status bar

Detailed description

Menu

Description

FLIGHT STATUS

Shows ground speed and relative altitude.

STORAGE REMAINING

Data Recording Time. Storage remaining in

hh:mm.

CONNECTIVITY

Number of GNSS satellites tracked.

WLAN connection signal strength to tablet.

LTE network signal strength.

BLK2FLY BATTERY

The bar shows the residual capacity of the

battery.

As the battery State of Charge (SoC)

decreases, the bar becomes shorter.

•

Green bar used up: A low battery warn-

ing is initiated. The aircraft automatically

activates RTH due to low battery life.

•

Yellow bar is used up: A critical battery

warning is initiated. The aircraft lands

in its current position. Pilot can control

horizontal position and yaw.

Warning

Summary of all given and past notifications

and flight restrictions.

Description

Description of the Application, Mission Planning

Summary of Contents for BLK2FLY

























































































































Search results

Summary of Contents for BLK2FLY

Reviews:

Related manuals for BLK2FLY

Brands by name

Popular brands

Leica BLK2FLY, User Manual

Search results

Summary of Contents for BLK2FLY

Reviews:

Related manuals for BLK2FLY

Brands by name

Popular brands