Leica 20 002 Instruction Manual Download Page 67

Page: 67 / 146

Picture mode

SHOW ALTERNATIVE IMAGE RANGES/FOCAL LENGTHS

Additional bright-line frames may be displayed depending on the

attached lens. These allow a simulation of the relevant focal

lengths. This process helps in the selection of the right lens for the

desired image range.

▸

Push the image field selector towards the lens
• The image field selector will snap back automatically when

released.

LIVE VIEW MODE

The Live View mode allows viewing the image object on the LCD

panel while the picture is taken. The image is show exactly as it is

rendered by the attached lens.

LIVE VIEW MODE ON/OFF

▸

Press the

button

PERMANENT DEACTIVATION OF LIVE VIEW MODE

Live View mode can be permanently disabled. Pressing the

button will then have no effect.

▸

Select

EVF/Display Control

in the main menu

▸

Select

LV Screen Target

▸

Select

LV disabled

Notes

• Live View mode is based on the image captured by the sensor.

The camera must control the shutter. Shutter control is audible

and may result in a slight delay in shutter release.

• The camera will warm up when Live View mode is used for an

extended period of time. Power consumption will simultaneously

increase.

• Alternating current causes brightness fluctuations invisible to

the human eye in many light sources. This may result in a

flickering of the Live View screen image due to the sensitivity

and scan rate of the image sensors. Picture quality will not be

impacted. The effect can be avoided by selecting a slower

shutter speed.

Summary of Contents for 20 002



















































































































































Search results

Summary of Contents for 20 002

Reviews:

Related manuals for 20 002

Brands by name

Popular brands

Leica 20 002, Instruction Manual

Search results

Summary of Contents for 20 002

Reviews:

Related manuals for 20 002

Brands by name

Popular brands