manualshive.com logo in svg

Leica Geosystems TM6100A, User Manual, Page: 93 / 126

Share
Download
Leica Geosystems TM6100A User Manual Download Page 93

Safety Directions

TM6100A

93

6.5

Hazards of Use

Warning

The absence of instruction, or the inadequate imparting of instruction, can lead to 
incorrect or adverse use, and can give rise to accidents with far-reaching human, 
material, financial and environmental consequences.

Precautions:

All users must follow the safety directions given by the manufacturer and the direc-
tions of the person responsible for the product.

Caution

Watch out for erroneous measurement results if the product has been dropped or 
has been misused, modified, stored for long periods or transported.

Precautions:

Periodically carry out test measurements and perform the field adjustments indicated 
in the user manual, particularly after the product has been subjected to abnormal use 
and before and after important measurements.

Caution

Reflectors can cause personal injury and/or mechanical damage, when dropped.

Precautions:

Secure the reflector with a lanyard when moving the reflector.

Summary of Contents for TM6100A































































































































Reviews:

No comments