Leica Geosystems GS14, User Manual, Page: 18 / 54

Software
for
Description
☞
Ensure that a Leica microSD card is inserted into
the GS instrument before starting the upload.
Refer to "4.3 Working with the Memory Device".
2.2.2 Power Concept
Use the batteries, chargers and accessories recommended by Leica Geosystems
to ensure the correct functionality of the instrument.
Power for the instrument can be supplied either internally or externally.
Model Power supply
Internally One battery (GEB331) fits into the instrument.
Externally GEB371 battery connected via a cable, or
Car battery connected via a converter cable supplied by Leica
Geosystems, or
10.5 V
‑
28 V DC power supply via a converter cable supplied
by Leica Geosystems, or
110 V/240 V AC to 12 V DC power supply unit, supplied by
Leica Geosystems.
For permanent operations use U ninterruptible P ower S upply units as a back-up
in a main power failure.
2.2.3 Data Storage Concept
Data (Leica GNSS raw data and RINEX data) can be recorded on the microSD
card.
Device Description
microSD card The GS14/GS16 GNSS instrument has a microSD card slot fit-
ted as standard. A microSD card can be inserted and
removed. Available capacity: 1 GB
☞ While other microSD cards can be used, Leica Geosystems recom-
mends to only use Leica microSD cards and is not responsible for data
loss or any other error that can occur while using a non-Leica card.
Unplugging connecting cables, removing the data storage device or interrupting
the power supply during the measurement can cause loss of data. Only remove
the data storage device, unplug connecting cables or interrupt the power sup-
ply when the GS GNSS instrument is switched off.
microSD cards can, with the supplied adaptor, also be used in an OMNI drive as
supplied by Leica Geosystems. Other PC card drives can require an adaptor.
General
Power options
☞
Description
Memory device
☞
☞
18 Description of the System