manualshive.com logo in svg

Leica Geosystems BLK3D, User Manual

Share
Download
Leica Geosystems BLK3D User Manual Download Page 61

20.2

Definition of Use

•

Capturing 3D images

•

Measuring in 3D images

•

Measuring distances

•

Tilt measurement

•

Point to point measurement

•

Data transfer with Bluetooth

®

/WLAN

•

2D/3D CAD export

•

Use of the product without instruction

•

Use outside of the intended use and limits

•

Disabling safety systems

•

Removal of hazard notices

•

Opening the product using tools, for example screwdriver, unless this is

permitted for certain functions

•

Modification or conversion of the product

•

Use after misappropriation

•

Use of products with recognisable damage or defects

•

Use with accessories from other manufacturers without the prior explicit

approval of Leica Geosystems

•

Deliberate dazzling of third parties

•

Controlling of machines, moving objects or similar monitoring application

without additional control and safety installations

•

Aiming directly into the sun

•

Inadequate safeguards at the working site

WARNING

Reasonably foreseeable misuse can lead to injury, malfunction and

damage

It is the task of the person responsible for the equipment to inform the user

about hazards and how to counteract them.

▶

The product is not to be operated until the user has been instructed on

how to work with it.

20.3

Limits of Use

Suitable for use in an atmosphere appropriate for permanent human habita-

tion. Not suitable for use in aggressive or explosive environments.

WARNING

Working in hazardous areas, or close to electrical installations or sim-

ilar situations

Life Risk.

Precautions:

▶

Local safety authorities and safety experts must be contacted by the per-

son responsible for the product before working in such conditions.

Intended use

Reasonably

forseeable misuse

Environment

Safety Directions

61

Summary of Contents for BLK3D







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands