manualshive.com logo in svg

Leica BIOSYSTEMS HistoCore BIOCUT, Instructions For Use Manual

Share
Download
Leica BIOSYSTEMS HistoCore BIOCUT Instructions For Use Manual Download Page 22

22

Version 1.7, Revision K 

 

Instrument Components and Specifications

3

Rear view

Fig. 5 

 

1

2

3

1

Magnet  

3

Retraction switch

2

Coarse feed direction change

3.2 

Instrument specifications

Basic instrument with 2-step mechanical trimming, silent retraction with ON/OFF selection, 
ergonomically positioned coarse feed wheel with user selectable turn directions,  without specimen 
orientation or additional accessories.

•  Manual mechanical rotary microtome with low-maintenance and backlash-free precision micrometer 

feed system. 

•  Horizontal feed and vertical stroke mechanisms with cross roller bearings.
•  Smooth-running hand-wheel allows two manual sectioning modes: rocking mode and conventional 

manual sectioning with full hand-wheel rotation.

•  Two independent hand-wheel locking systems.
•  Operator-adjustable force balancing system with spring force compensation offers two advantages: 

1.  Flexibility to adapt the spring force to different weights of specimen/clamps, minimizing the risk 

of an object head dropping into the knife. 

2.  No need for a heavy counter balance in the hand-wheel. 

•  Silent specimen retraction system with ON/OFF function. 
•  Ergonomically positioned coarse feed wheel which can be personalized by user selectable preferred 

turn direction.

•  Ergonomically positioned 2-step mechanical trimming lever for quick trimming of blocks using 

predefined trim steps of 30µm and 10µm. 

•  Large top surface area allows placement of objects that require a flat surface. 
•  Removable top tray allows storage of sectioning tools and prevents items from falling.

3.3 

Technical Data

General

Section thickness range

1 - 60 µm

Summary of Contents for HistoCore BIOCUT



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands