36
Version 6.9, Revision H
Software
6
6.4.8 Sledge speed
Fig. 24
Displays current sectioning or return stroke speed in mm/s (millimeters per
second).
•
To modify any of the settings, click on the corresponding value.
Note
The graphic display is active only while sectioning is in progress. The currently selected sectioning and
return stroke speed are displayed via a green bar on a scale of 0 - 80 mm/s.
6.4.9 Operation mode
Displays current sectioning or return stroke speed in mm/s (millimeters per second).
•
To modify any of the settings, click on the corresponding value.
Note
An initialization of the microtome must first be carried out after startup to be able to work with the
instrument after it is switched on, see
Displays current sectioning or return stroke speed in mm/s (millimeters per second).
•
To modify any of the settings, click on the corresponding value.
Buttons prior to initialization Buttons after initialization
1
2
4
3
Fig. 25
1
Init
•
Clicking on this button opens the
Safety check – initialisation
window, see
•
Prior to initialization, the button blinks yellow.
•
After the initialization procedure has been completed, the color of the
Init
button
will change from yellow to green.
•
After a few seconds, the caption on the button will change from
Init
to
Automatic
.
2
Automatic
•
Clicking on this button switches the instrument to automatic mode.
•
When activated, the button will light up in green.
