manualshive.com logo in svg

Leica BIOSYSTEMS Aperio AT2 DX, User Manual

Share
Download
Leica BIOSYSTEMS Aperio AT2 DX User Manual Download Page 57

Aperio AT2 DX User’s Guide, Revision A © Leica Biosystems Imaging, Inc. 2019

57

Appendix B:  Specifications

Aperio AT2 DX Hardware Specifications

Feature

Details

Input format

1-inch x 3-inch (2.54 cm x 7.62 cm) microscope slides with 0.17 mm coverslip 

Slide loading

Manual: One 1-inch x 3-inch (2.54 cm x 7.62 cm) slide when using the slide tray 
Automatic: Up to 400 1-inch x 3-inch (2.54 cm x 7.62 cm) slides when using the AutoLoader

Scanning region

1-inch x 3-inch (2.54 cm x 7.62 cm) slide: 22.9 mm (top to bottom edges) x 54.9 mm (measured 
from the right edge of the slide)

Objective lens

20x/0.75 NA Plan Apo

Scanning resolution

50,000 pixels per inch (0.5 µm per pixel) with 20x objective

Scanning method

Line scanning (U.S. Patent 6,711,283)

Tissue finding

Automatic

Focus

Automatic

Scan output

24-bit color contiguous pyramid TIFF, immediately viewable

eSlide file format

Standard pyramid tiled TIFF with JPEG2000 image compression

Network interface

1 gigabit per second Ethernet

Dimensions

Approximately 23.5 inches (H) x 16 inches (W) x 25.5 inches (D) 
59.7 cm (H) x 40.6 cm (W) x 64.7 cm (D)

Weight

Approx. 129 lbs (58.5 kg)

Power

Universal AC input, power factor corrected. 100vAC – 240VAC, 50Hz/60Hz, 2 amp. See 

“AC 

Power” on page 56

 for UPS recommendations.

Monitor

Calibrated LCD monitor

AutoLoader Specifications

The AutoLoader can contain up to 400 

1-inch x 3-inch (2.54 cm x 7.62 cm)

 slides and has been designed to work with many 

commonly available glass microscope slides. The dimensions of a slide must be such that each slide fits easily into an 
AutoLoader rack slot and can be securely loaded onto and unloaded from the stage by the AutoLoader. 

Please ensure that your slides meet these specifications prior to use of the AutoLoader:

1

  

Slide width

0.968 inches (24.6 mm) to 1.043 inches (26.5 mm)

Slide length

2.898 inches (73.6 mm) to 3.016 inches (76.6 mm)

Maximum thickness including coverslip and 
label

0.058 inches (1.48 mm)

Scanning region

22.9 mm (top to bottom edges) x 54.9 mm (measured from the right edge of the slide)

Successful scans require well prepared slides. See 

“Slide Preparation Tips” on page 15

 for slide preparation guidelines. 

1

. Slide dimensions are approximate, and are affected by the presence of excessive mounting media, overhanging coverslips, and label thickness. 

In all cases, it is up to the user to load slides which fit easily and smoothly into the AutoLoader rack. Failure to follow this advice may result in 
damage to specimens and/or the AutoLoader mechanism.

Summary of Contents for Aperio AT2 DX



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands